Knowledge classified Panel Furniture

The first part of the selection panel.

First of all, we from the sheet of material to analyze the difference between the various plates.

Plate for furniture mainly in the following four types.

1, particleboard

Accessories will be solid wood boards, and other wood-based materials break, add the chemical agent, after dealing with high temperature and high pressure molding.

Advantages. Noise performance, heat and moisture.

Shortcomings. Hard milling type, the second change worse. Plate damaged corner, it is difficult to repair.

2, fibreboard

At present, the mainstream of the fiberboard furniture, most of them belonging to MDF.

MDF, as its name implies, is based on plant fibers, adding chemical additives, high temperature and high pressure treated after forming.

Advantages.

Smooth, fine texture to facilitate the design and milling type. Good toughness and difficult to break.

Shortcomings.

Moistureproof poor nails less grip strength is not high, because the internal structure of features, large plastic, to some extent, the environmental factor must be low.

3. Solid wood finger-board

Solid wood finger-board is the timber, will be a small piece of solid wood, spliced into a plate.

Advantages

Less plastic, better environmental protection. Processing again.

Shortcomings

Easy to deformation, cracking, higher costs.

4. Multi-layer solid wood boards

With multi-layer plywood cross, by cold-pressing, hot pressing, sanding, multi-channel production processes.

Advantages

Deformation is not easy, natural realism.

Shortcomings

High cost.

Particleboard: big in Asia, Etam, Kronospan
MDF: Kat as, Robin
MLB: the United States and Asia


Secondly, we look at the domestic mainstream sheet classification of furniture, as well as their characteristics.

At present, mainstream furniture manufacturers use three plates.

Dae board board board Iger.

Three plates have reached the European E1, E0 products.

Domestic furniture E1 standard sheet requirements, and high cost of E0 the plate.

Therefore, the three panels for furniture, and the vast majority of the plate is E1.

The same plate, because the distinction between origin. Work is also nuanced.

Iger board as a result of German imports, the price more expensive than the other two.

Furniture is durable goods, except for manufacturers to work, sheet metal is a key focus.

Must buy the rest assured.

Three panels are good panels, but to beware of fake or poor quality of experience of the plate.

To be effective the distinction is to buy brand-name furniture manufacturers.

Manufacturers, brand name furniture manufacturers, sheet metal is very strict to buy, to buy their products, in fact, that is, a quality assurance plan. Although the prices higher than small companies.

Plate furniture purchase, we must purchase the regular brand products, and asked the panel to see if they note.

Plate formal furniture manufacturers will have to prove the information in this regard.